No Products in the Cart
9AM TO 4PM (MON- FRI) SHIPPING FROM PORT READING, NEW JERSEY, USA
International Orders: Please note that orders made outside the US will be shipped from our warehouse in Ukraine.
The set of Boride stones is collected from various series and is intended for sharpening of knives from any steels. The set includes 5 stones with a grain size: 150; 220; 400; 600; 1200, which will be enough for all stages of sharpening, from peeling to the final grinding. And the smooth reduction of grain, from stone to stone, guarantees efficient sharpening with minimal time.
You can work both "dry" and with ordinary water (or a little soap). It is not recommended to use force and pressure during sharpening / finishing!
Does not require special care. Cleaned under running water with a soapy stiff brush (can be a toothbrush). Align after formation on silicon carbide.
Note: Boride stones can have the following defects: saw marks on the work surface, minor chips at the corners and edges (no more than 1 mm).
From myself: Stones are very good in work, on quality favorably differ from stones of the Ukrainian production. They are made of different materials and on different bonds, which makes them very versatile in relation to work with different steels. Work with both water and oil.
Grain table:
on a scale FEPA-F (America) |
Grain size in microns |
on a scale FEPA-P (Europe) |
on a scale JIS (Japan) |
F150 | ~110 μm | P180 | J150 |
F220 | ~55 μm | P240 | J240 |
F400 | ~20 μm | P800 | J600 |
F600 | ~10 μm | P2000 | J1500 |
F1200 | ~3 μm | P8000 | J5000 |